Comments on: Cheyenne Tunic Sew Along Day 1: Interfacing & Placket

By: Entrance Placket Greer Jumpsuit - Hey June Handmade - Beadiebuddysbonanza

Entrance Placket Greer Jumpsuit - Hey June Handmade - Beadiebuddysbonanza — Sat, 14 Aug 2021 13:45:40 +0000

[…] The next directions present the right way to insert a placket. In case you favor pictures, the sewalong for the Cheyenne Tunic illustrates these steps nearly precisely. The principle distinction is that the placket on the Cheyenne has an angle in it, so it’s two items as an alternative of 1 folded placket. However building is similar. You’ll find that submit right here. […]

By: Front Placket Greer Jumpsuit - Hey June Handmade

Front Placket Greer Jumpsuit - Hey June Handmade — Fri, 04 Jun 2021 20:22:26 +0000

[…] The following instructions show how to insert a placket. If you prefer photos, the sewalong for the Cheyenne Tunic illustrates these steps almost exactly. The main difference is that the placket on the Cheyenne has an angle in it, so it is two pieces instead of one folded placket. But construction is the same. You can find that post here. […]

By: Adrianna

Adrianna — Tue, 10 Nov 2020 21:49:46 +0000

In reply to Terri Seravalli. When you are sewing the folded triangle bit at the bottom you are catching both plackets, but the edgestitch down the right placket should not catch that (unless you want to sew the shirt closed so the buttons are just decorative).

By: Terri Seravalli

Terri Seravalli — Tue, 10 Nov 2020 20:24:33 +0000

Hi! When you topstitch the right placket over the left, are you catching the left placket underneath or keeping it out of the way. Thanks!

By: Pattern Review :: Hey June Cheyenne Tunic - A Jennuine Life

Pattern Review :: Hey June Cheyenne Tunic - A Jennuine Life — Fri, 28 Aug 2020 20:45:39 +0000

[…] thorough yet concise with technical drawings. If that’s not your jam, there’s also a photo sew-along on her blog, which I did reference to ensure I was constructing the tower placket for the sleeves […]

By: Allison

Allison — Sat, 18 Apr 2020 00:09:46 +0000

Love this tutorial. My issue is that on both my muslin and main garment, there’s a pucker on the front left bottom button placket corner when I try to line up the plackets on top of each other. If I gently pull the fabric so the pucker is gone, then the left and right placket miss overlapping perfectly up by about 1/4”. Any thoughts on how to avoid this? Thanks!

By: Emilie Vigilant

Emilie Vigilant — Sun, 10 Nov 2019 21:22:51 +0000

J’aimerais avoir accès à mon compte pour télécharger le patron commandé hier
ça commence à etre vraiment pénible de chercher partout pour avoir accès a son compte pour imprimer
quoi
Merci de prendre en compte ma demande

By: Jane

Jane — Mon, 07 Jan 2019 21:26:13 +0000

I’m really excited to start on this pattern, but I want to make a collared pop-over. I mashed the front of view A and B together, which basically ended up being the front of the button-up, with 1″ cut off from the middle, and cut on the fold, but I’m doubting myself, because I would think the piece should be wider since it had to account for the button band. Have you tried this? Am I making any sense?? Thank you!

By: Isabella

Isabella — Tue, 30 May 2017 02:51:00 +0000

Your pictures and steps are a lifesaver! It’s taken me three days to complete day 1 but I’m soldiering on. Just wanted to add a quick note for those of us who are sewing buttonholes for the first time: triple check to make sure you are adding buttonholes to the correct placket side. I added them to the wrong side but was able to rip them out with a seam ripper…very carefully…

By: Adrianna

Adrianna — Tue, 04 Apr 2017 16:33:45 +0000

In reply to SurrenderDorothy. This is the 3/4 version, day 6 shows the long sleeves!